Touch Drivers

Downloadable Touch Drivers / Utilities

Elo Touch Drivers

Elo Touch Drivers

Windows 7/Vista/XP – (32/64 Bit) – Single -Touch Driver version 5.5.3 – 17.1MB

  • For USB and Serial interface
  • For Vartech/ELO resistive touch screens
  • Optional driver for All Elo touch technologies. IntelliTouch Plus is supported for devices using the 2520/2521 touch controllers only.

Windows 7/Vista/XP (32/64 Bit) – Multi-Touch Driver – 11.4MB

  • For USB and Serial interface
  • IntelliTouch, iTouch, AccuTouch, CarrollTouch (IR), IntelliTouch Plus, iTouch Plus, PulseTouch, Projected Capacitive (pCAP), Surface Capacitive, Optical

Windows 2000/XP/Vista (32 Bit) – 3.5MB

  • For USB and Serial interface
  • This driver does not support full-screen DOS applications.

Windows XP Embedded – USB Interface

  • All except Acoustic Pulse Recognition and Projected Capacitive

Windows XP Embedded – Serial Interface

  • All except Acoustic Pulse Recognition and Projected Capacitive

Windows CE 6.0 Embedded – USB and Serial Interface

  • All except Acoustic Pulse Recognition and Projected Capacitive

Windows CE 5.0 Embedded – USB and Serial Interface

  • All except Acoustic Pulse Recognition and Projected Capacitive

Windows CE 4.2 Embedded – USB and Serial Interface

  • All except Acoustic Pulse Recognition and Projected Capacitive

Windows CE 4.0 and 4.1 Embedded – Serial Interface

  • All except Acoustic Pulse Recognition and Projected Capacitive

Windows CE 4.1 Embedded – USB Interface

  • All except Acoustic Pulse Recognition and Projected Capacitive

Windows CE 4.0 Embedded – USB Interface

  • All except Acoustic Pulse Recognition and Projected Capacitive

Windows 98/Me

  • This driver does not support full-screen DOS applications.
  • The calibration tool is contained within the driver software.

Windows 95/98/Me Serial

  • Supports up to 4 monitors. To use touchscreens with DOS applications on this operating system, you must use the Windows 3.1/DOS drivers, not this driver.
  • The calibration tool is contained within the driver software.

Windows NT Serial

  • For Windows NT 4.0; version 4.0 with updated User Interface for Single Monitor applications. For multiple monitor applications, use version 3.10C.
  • The calibration tool is contained within the driver software.

DOS and Windows 3.x

  • UnZIP to blank floppy with WinZip or “PKUNZIP -d DWDSK a:”, then run A:\INSTALL.
  • The calibration tool is contained within the driver software.

Diagnostics Programs

  • Carroll Touch Infrared Serial Interface Diagnostics.

(Please read the Elo Touch End User Agreement before downloading Elo Touch Drivers)

3M / Microtouch Drivers

3M / Microtouch Drivers

3M Touchscreen Drivers and Kernel Patches

  • Latest driver updates available directly from the 3M website

MicroTouch Controllers 7.13 Build 1, Windows 7/Vista/XP/2000 – 3.2MB

  • 3M MicroTouch Controllers CX, DX (DST), EX, RX (SC400, SC500, SC800)

TouchWare Driver, Release 5.64 SR5

  • This software supports MicroTouch™ Touch Screen Controllers (EX II, SMT3, MT3000, MT410, MT510, new SC Series)

Windows XP/Vista/2000

  • The MT 7.12 Driver Supports both ClearTek Capacitive Touch with an EXII Controller, Resistive Touch with either SC400, SC500 or SC800 Controllers, Serial, and USB – User Documentation

Windows XPe

  • The MT 7.11 Driver Supports both ClearTek Capacitive Touch with an EXII Controller and Resistive Touch with either SC400, SC500 or SC800 Controllers – User Documentation

MicroTouch™ USB HID Calibration Tool 7.01

  • The HID Calibration Tool provides support for MicroTouch touch screen operation on the Microsoft® Windows® 98SE, Me, 2000, XP operating systems. This tool works with MicroTouch controllers that support HID including the new SC Series USB HID compatible 4-, 5-, 8-wire resistive controllers. Use this calibration tool for optimization of touch performance to the MicroTouch™ touch screen 1% TPE accuracy specification.

Legacy Touch Drivers

Technology Controller Supported Drivers Available
Legacy ClearTek Capacitive EX II, SMT3, MT3000, MT410, MT510, new SC Series
Legacy 3M MicroTouch Resistive
Legacy 3M Dynapro Resistive SC3 Serial and SC4 Serial or USB
Legacy 3M Dynapro/Microtouch Resistive SC3 Serial and SC4 Serial or USB
NFI NFI 3, NFI 4 – 10.4″ and larger touch screens supported
  • NFI (Win NT/9x/3.1/DOS)
    • Win NT Ver. 1.6.2, Release 3.0.0
    • Win 9X Ver. 1.6.2, Release 3.0.0
    • Win 3.1/DOS: Ver. 4.2.3, Release 3.0.0
NFI NFI 3, NFI 4 – 8.4″ touch screens supported
  • NFI (Win NT/9x)
    • Win NT: Ver. 1.7.0, Release 4.0.0
    • Win 9X: Ver. 1.7.0, Release 4.0.0
NFI NFI 3, NFI 4 – All Sizes

TouchWare

TouchWare 3.4 for Windows 3.1x and DOS

  • Compatible with TruePoint, ClearTek, TouchTek, and TouchPen

TouchWare 3.4 for DOS

  • Compatible with TruePoint, ClearTek, TouchTek, TouchPen, and ThruGlass. If you’re using this driver with ThruGlass, please download TGCal.

TouchWare for NT 3.5.1

  • Compatible with TruePoint, ClearTek, TouchTek Premier, and TouchPen.

TouchWare OS/2 for 3.0 and 4.0

  • Compatible with TruePoint, ClearTek, TouchTek, and TouchPen.

TouchWare 5.32 for MAC

  • This driver is designed for MicroTouch USB ClearTek 3000 and TouchTek controllers. The operating systems supported are Mac OS 8.5, 8.5.1, 8.6, and 9.0 on iMac, G3 and G4 systems with USB firmware 1.1 or 1.2. The following options are accessed through the control panel: calibration, configuration options and multiple monitors support for up to 4 USB touch screens. The installation is manual.

LINUX TouchWare 5.64 SR1 Drivers – ReadMe File