DiamondVue Industrial Grade C1D2 Hazardous Area Monitors and Computers

DiamondVue panel mount monitors and computers, non incendive and certified for use in conditions in hazardous area environments deemed Class 1 Division 2.

VarTech’s CID2 hazardous area certified monitors and computers are built with stainless steel panel mount bezels which offer NEMA 4X (IP66) protection from dirt and moisture. These units are incapable of causing ignition (non-incendive) from flammable gas, vapors, or dust under normal working conditions in hazardous area environments deemed Class 1 Division 2.

Available in screen sizes ranging from 10.4” to 24”.

Stainless Steel Swatch

Enclosures available in 316 stainless steel (NEMA 4X).

  • Industrial-grade LED back-lit LCD.
  • Power input: 12/24 VDC or 110/220 VAC internal power supply
  • Construction/environmental design: bezel - NEMA 4X (IP66) 316 stainless steel, 1-piece gasket design on the inner mounting surface of faceplate/rear enclosure - rugged black powder-coat aluminum
  • Mounting configurations: panel mount with studs
  • Available touchscreens: resistive, and PCAP
  • Operating temperature: -20° to 60° C (Extreme Temperature Package available depending on size. Please inquire.)
  • Relative humidity: ≤ 0% to ≤ 95% (depending on mechanical build)
  • Altitude: 10,000 ft MSL
  • 2-year warranty

This VarTech product has been tested, examined, by a third party independent testing laboratory and found to comply with the applicable requirements of UL60950-1/CSA C22.2 No. 6095-1, Second Edition, Rev. March 27, 2007: Information Technology Equipment – Safety – Part 1: General Requirements ANSI/ISA 12.12.01-2013, 3 June 2013: Non-incendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Division 1 and 2 Hazardous (Classified) Locations CSA C22.2 No. 213-M1987, First Edition, Reaffirmed 1999: Non-incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Locations.

Looking for a fully sealed hazardous area unit, click here.

Looking for a non-hazardous area unit, click here.

RoHS Compliant
DiamondVue Industrial Grade C1D2
DiamondVue Industrial Grade C1D2 Hazardous Area Monitors and Computers

REQUEST PRICING

Looking for something special?
Contact us with any custom request.
CUSTOM REQUEST FORM

DiamondVue Industrial Grade C1D2 Hazardous Area Sizes Available:

Industrial Grade C1D2
VTPC100PS
  • 10.4″ LED back-lit LCD
  • Panel mount with studs
  • Sunlight readable available
  • Touchscreen available
  • Available as a standalone monitor or all-in-one computer
Industrial Grade C1D2
VTPC500PS
  • 15″ LED back-lit LCD
  • Panel mount with studs
  • Sunlight readable available
  • Touchscreen available
  • Available as a standalone monitor or all-in-one computer
Industrial Grade C1D2
VTPC700PS
  • 17″ LED back-lit LCD
  • Panel mount with studs
  • Sunlight readable available
  • Touchscreen available
  • Available as a standalone monitor or all-in-one computer
Industrial Grade C1D2
VTPC900PS
  • 19″ LED back-lit LCD
  • Panel mount with studs
  • Sunlight readable available
  • Touchscreen available
  • Available as a standalone monitor or all-in-one computer
Industrial Grade C1D2
VTPC2100PS
  • 21.5″ widescreen LED back-lit LCD
  • Panel mount with studs
  • Touchscreen available
  • Available as a standalone monitor or all-in-one computer
Industrial Grade C1D2
VTPC2400PS
  • 24″ widescreen LED back-lit LCD
  • Panel mount with studs
  • Touchscreen available
  • Available as a standalone monitor or all-in-one computer