ToughStation Fully Sealed C1D2 Hazardous Area Monitors and Computers

Fully sealed hazardous area monitors and computers in gasket-sealed stainless steel enclosures, non incendive and certified for for use in hazardous area environments deemed Class 1 Division 2.

VarTech’s ToughStation Series of hazardous area certified monitors and computers are fully sealed and NEMA 4X (IP66) protected from dirt and moisture. These units are non-incendive, ignition resistant against flammable gas, vapors, or dust under normal working conditions in CID2 hazardous area environments. The rugged gasket-sealed stainless steel enclosure offers a fanless, low power consumption industrial-grade design for reliable Hazloc HMI viewability and operations throughout a variety of harsh environments.

Available in screen sizes ranging from 10.4” to 24”.

Stainless Steel Swatch

Enclosures available in 316 stainless steel (NEMA 4X).

  • Industrial-grade LED back-lit LCD.
  • Power input: 12/24 VDC or 110/220 VAC internal power supply
  • Construction/environmental design: CID2 certified, fully sealed, NEMA 4X (IP66) protection, 316 stainless steel enclosure with anodized aluminum rear cover. Available with heat sink, if required.
  • Mounting configurations: panel with studs, console, and 100 mm VESA pattern
  • Available touchscreens: resistive, and PCAP
  • Operating temperature: -20° to 60° C (Extreme Temperature Package available depending on size. Please inquire.)
  • Relative humidity: ≤ 0% to ≤ 95% (depending on mechanical build)
  • Altitude: 10,000 ft MSL
  • 2-year warranty

This VarTech product has been tested, examined, by a third party independent testing laboratory and found to comply with the applicable requirements of UL60950-1/CSA C22.2 No. 6095-1, Second Edition, Rev. March 27, 2007: Information Technology Equipment – Safety – Part 1: General Requirements ANSI/ISA 12.12.01-2013, 3 June 2013: Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Division 1 and 2 Hazardous (Classified) Locations CSA C22.2 No. 213-M1987, First Edition, Reaffirmed 1999: Nonincendive Electrical Equipment for Use in Class I, Division 2 Hazardous Locations.

Looking for a panel mount hazardous area unit? Click here.

Looking for a non-hazardous fully sealed unit, click here.

RoHS Compliant
ToughStation Fully Sealed C1D2
ToughStation Fully Sealed C1D2 Hazardous Area Monitors and Computers

REQUEST PRICING

Looking for something special?
Contact us with any custom request.
CUSTOM REQUEST FORM

ToughStation Fully Sealed C1D2 Hazardous Area Sizes Available:

Fully Sealed C1D2
VTPC100VS
  • 10.4″ LED back-lit LCD
  • Multiple mounting options
  • Sunlight readable available
  • Touchscreen available
  • Available as a standalone monitor or all-in-one computer
Fully Sealed C1D2
VTPC500VS
  • 15″ LED back-lit LCD
  • Multiple mounting options
  • Sunlight readable available
  • Touchscreen available
  • Available as a standalone monitor or all-in-one computer
Fully Sealed C1D2
VTPC700VS
  • 17″ LED back-lit LCD
  • Multiple mounting options
  • Sunlight readable available
  • Touchscreen available
  • Available as a standalone monitor or all-in-one computer
Fully Sealed C1D2
VTPC900VS
  • 19″ LED back-lit LCD
  • Multiple mounting options
  • Sunlight readable available
  • Touchscreen available
  • Available as a standalone monitor or all-in-one computer
Fully Sealed C1D2
VTPC2100VS
  • 21.5″ widescreen LED back-lit LCD
  • Multiple mounting options
  • Touchscreen available
  • Available as a standalone monitor or all-in-one computer
Fully Sealed C1D2
VTPC2400VS
  • 24″ widescreen LED back-lit LCD
  • Multiple mounting options
  • Touchscreen available
  • Available as a standalone monitor or all-in-one computer